Jaw Crusher
Processing ability: | 0-200 t/h |
Max feeding size: | According to the model |
Product Fineness: | According to the model |
Range of application: | Jaw Crusher is specially used for coarse crushing of all kinds of stones such as Limestone, Gypsum, Barite, Marble, Calcite, Feldspar, Granite, Calcium Carbonate, etc. |
Overview
Overview of Jaw Crusher:
Stone crusher as one crushing equipment in the whole stone production line is irreplaceable,like jaw crusher,hammer crusher and etc.The highest anti-pressure strength of crushed material is 320Mpa. Our design and production are of high position both at home and abroad.
Working Principle of Jaw Crusher:
The structure of jaw crusher: main frame, eccentric shaft, a large belt pulley, fly wheel, swing jaw, side guard plate, toggle plate, Rear bracket, adjust gap screw, reset spring, and fixed jaw and swing jaw board etc., and the toggle plate also plays a role of protection.
The motor transmits power through belt and belt pulley, drives the swing jaw surround the eccentric shaft do periodic motion. The angle between toggle plate and swing jaw increases when swing jaw moves up., which makes the moving jaw get closes to the fixed jaw. At the same time the material is squeezed, rubbing, grinding and other multiple broken. The angle of Jaw Crusher between toggle plate and swing jaw decreases when swing jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.
Benefit
Performance characteristics of Jaw Crusher:
► Deep broken cavity, no dead zone, increased capacity and output of the feed;
► Large crushing ratio, uniform particle size products;
► Pad-style nesting population adjustment devices, and ease of adjustment range, and increase the flexibility of the equipment;
► Safe and reliable lubrication system, convenient replacement parts, small maintenance workload;
► Structure is simple, reliable; low operating costs.
► Energy-saving equipment: stand-alone energy-saving 15% ~ 30%; energy saving of the system is more than doubled;
► The discharging size of jaw crusher can be adjusted to meet the requirements of different users;
► Low noise and less dust.
Specifications
Specification of Jaw Crusher:
Model |
Opening Size |
Max.Feed Size |
Output Size |
Power |
Capacity |
Dimension |
PE150X250 |
150X250mm |
125mm |
10-40mm |
5.5kw |
1-3 t/h |
896x745x935mm |
PE250X400 |
250X400mm |
200mm |
20-50mm |
15kw |
5-20 t/h |
1430x1310x1340mm |
PE400X600 |
400X600mm |
350mm |
40-100mm |
30-37kw |
15-60 t/h |
1700x1732x1653mm |
PE500X750 |
500X750mm |
425mm |
50-100mm |
45-55kw |
40-110 t/h |
1950x1878x1855mm |
PE600X900 |
600X900mm |
480mm |
65-160mm |
55-75kw |
90-180 t/h |
2200x2008x2302mm |
PE750X1060 |
750X1060mm |
630mm |
80-140 mm |
90-110kw |
110-320 t/h |
2624x2302x3110mm |
PE900X1200 |
900X1200mm |
750mm |
95-180mm |
132kw |
220-450 t/h |
3550x2823x3196mm |
PEX150X750 |
150X750mm |
125mm |
18-48mm |
15kw |
5-16 t/h |
1200x1500x1200mm |
PEX250X750 |
250X750mm |
210mm |
25-60mm |
22-30kw |
15-30 t/h |
1667x1545x1020mm |
PEX250X1000 |
250X1000mm |
210mm |
25-60mm |
30-37kw |
15-30 t/h |
1695x1921x1440mm |
PEX250X1200 |
250X1200mm |
210mm |
25-60mm |
37-45kw |
20-60 t/h |
2192x1900x1950mm |
Note: This specification is just reference, any changes are subject to the products.